Part Number: A-23.481.100
Analyzer for specific (total) conductivity, cation (acid) conductivity, and degassed cation conductivity.
Features:
Complete system with transmitter, sensors, flow meter, cation resin column and sample reboiler.
Simple exchange of cation resin column and calculation of resin consumption with alarm.
Highest sample degassing efficiency by thermal degassing method.
Automatic boiling point compensation for reproducible results despite air pressure changes.
Fast response time after start-up.
Effective and stable CO2 removal from the sample in the reboiler.
Specifications
Transmitter AMI Deltacon DG, electronic heater controller, sample reboiler unit and three conductivity sensors UP-Con1000-SL in flow cells Catcon-Plus-SL and B-Flow UP-CON-SL mounted on a stainless steel panel, ready for installation and operation.
Transmitter with two signal outputs for measured values or continuous control, two relays as limit switches or as controllers, alarm relay as summary alarm indication, input for potential free contact.
Specifications
Transmitter AMI Deltacon DG, electronic heater controller, sample reboiler unit and three conductivity sensors UP-Con1000-SL in flow cells Catcon-Plus-SL and B-Flow UP-CON-SL mounted on a stainless steel panel, ready for installation and operation.
Transmitter with two signal outputs for measured values or continuous control, two relays as limit switches or as controllers, alarm relay as summary alarm indication, input for potential free contact.
The flow cell is equipped with a manual flow adjustment valve and a digital sample flow meter.
Use of the SWAN Back Pressure Regulator is highly recommended.
Measuring range:
- 0.055 to 1000 μS/cm,
- pH 7.5 to 11.5,
- ammonia 0.01 to 10 ppm
Sample conditions:
- Temperature: up to 50 °C
- Inlet pressure: up to 2 bar
- Outlet pressure: pressure-free (atmospheric drain)
Sample connections:
- Inlet: Swagelok ¼” tube adapter
- Outlet: G ½” adapter for flexible tube 20 x 15 mm
Power Supply
- 100-240 VAC (±10%)
- 10-36 VDC
Part Number: A-23.481.100
Analyzer for specific (total) conductivity, cation (acid) conductivity, and degassed cation conductivity.
Features:
Complete system with transmitter, sensors, flow meter, cation resin column and sample reboiler.
Simple exchange of cation resin column and calculation of resin consumption with alarm.
Highest sample degassing efficiency by thermal degassing method.
Automatic boiling point compensation for reproducible results despite air pressure changes.
Fast response time after start-up.
Effective and stable CO2 removal from the sample in the reboiler.
Specifications
Transmitter AMI Deltacon DG, electronic heater controller, sample reboiler unit and three conductivity sensors UP-Con1000-SL in flow cells Catcon-Plus-SL and B-Flow UP-CON-SL mounted on a stainless steel panel, ready for installation and operation.
Transmitter with two signal outputs for measured values or continuous control, two relays as limit switches or as controllers, alarm relay as summary alarm indication, input for potential free contact.
Specifications
Transmitter AMI Deltacon DG, electronic heater controller, sample reboiler unit and three conductivity sensors UP-Con1000-SL in flow cells Catcon-Plus-SL and B-Flow UP-CON-SL mounted on a stainless steel panel, ready for installation and operation.
Transmitter with two signal outputs for measured values or continuous control, two relays as limit switches or as controllers, alarm relay as summary alarm indication, input for potential free contact.
The flow cell is equipped with a manual flow adjustment valve and a digital sample flow meter.
Use of the SWAN Back Pressure Regulator is highly recommended.
Measuring range:
- 0.055 to 1000 μS/cm,
- pH 7.5 to 11.5,
- ammonia 0.01 to 10 ppm
Sample conditions:
- Temperature: up to 50 °C
- Inlet pressure: up to 2 bar
- Outlet pressure: pressure-free (atmospheric drain)
Sample connections:
- Inlet: Swagelok ¼” tube adapter
- Outlet: G ½” adapter for flexible tube 20 x 15 mm
Power Supply
- 100-240 VAC (±10%)
- 10-36 VDC
